How to Use a Lens Stick for Easy Contact Lens Insertion

Quick answer

A lens stick case simplifies contact lens insertion by giving you a stable, one-handed tool to place the lens directly onto your eye. Follow these steps to get it right every time.

Step-by-step: Inserting lenses with a lens stick case

1. Step 1: Prepare the lens stick case: Remove the protective layer from the glossy surface of the lens stick case. Wash your hands thoroughly, then dry them with a lint-free towel. Attach the silicone cup to the stick if it comes separately. A common mistake is forgetting to remove the protective film, which can leave a sticky residue on the case.
2. Step 2: Attach the lens to the stick: Place the contact lens on your clean fingertip, then gently press the silicone cup of the lens stick onto the center of the lens. The lens should stick to the cup without folding. Make sure the lens is right-side out. If the lens won't stick, the cup may be dirty or the lens is too dry. Rinse both with solution and try again.
3. Step 3: Position the lens on your eye: Hold the lens stick with your dominant hand. Use your other hand to hold your upper eyelid open. Look slightly upward, then bring the lens stick toward your eye until the lens touches the white of your eye (sclera). Gently press the cup to release the lens. Looking directly at the stick can cause you to blink instinctively. Aim for the sclera instead for a smoother placement.
4. Step 4: Remove the stick and blink: Slowly pull the lens stick straight away from your eye. Blink a few times to center the lens. If the lens feels uncomfortable, it may be off-center or inside out — remove it, rinse, and repeat from Step 2. Never force the lens stick sideways; pulling straight out prevents scratching the cornea.
5. Step 5: Clean and store the lens stick case: After use, rinse the silicone cup with fresh contact lens solution and let it air-dry. Store the lens stick case in a clean, dry place. The case can also hold jewelry or creams, but avoid mixing uses without thorough cleaning. Bacteria can build up if the case is stored while damp. Always dry it completely before closing.

Product facts

• Lens stick case: Compact and multifunctional — suitable for lenses, jewelry, or creams, with a protective layer over the glossy surface that must be removed before use. This means the lens stick case doubles as a travel storage box, but you need to peel off the protective film before first use to keep the surface clean and non-sticky.